Jumbotrac JT1 10'6" 20X This is the corner fitting

This is the corner fitting for the Festival CAN-W frame tent design

The operational length for this strap is intended to be anywhere from 6' to 14'

The loop is designed to connect over the eave arm of a Side Tee or Special Side Tee fitting during the assembly process

This is an intermediate eave fitting for the Jumbotrac hip ended frame tent design that is placed along the length of tent

push button and an additional hole in the center of the extrusion

Jumbotrac JT1 10'6" 20X This is the corner fittingThis kedered aluminum tubing is used as a rafter in the Jumbotrac 50' wide frame tent system on the hip end only. Each length of tubing is drilled with parallel 7 16" diameter through holes located 3" from each end of the extrusion for connection to a 3 8" Diam. push button and an additional 9 16" holes for connection of braces. Specifications: Base Material: 4. 65" x 2. 06" JT1 Extrusion 6061 T6 Structural Aluminum Tubing, ID 1. 750", OD 2. 06", and